characteristic:

1.detection methods have three kinds of A high sensitivity mode (usually the detection method) B Smoothing mode (up and down sensitivity difference to remove the impurites on the belt)C Colored pigment mode (to eliminate impurities in the uniform segment of the detected object).

2.digital signal processing systerm,compared with the traditional analog method,the circuit board is more compact.Together,the sensitivity of the adjustment range is wider,the location of the detection more accurate.

3.dedicated wireless transmission mode,the complexity of the worshop environment can reach 200 meters Distance,far more than the distance of WIFI of 10 metres,and the workshop to be arranged WIFI is Very difficult,also do not need the computer must be in the needle detector,the computer can be in the Office Room, a computer can monitor the 255 needle detector,very convenient to use the printer on the computer,each data Can save.The data in the computer can be stored permanently,but the firld micro printer The data can not be saved,and the printing paper is very difficult to buy.

4.capacitive touch sensing technology,responsive and long life,staff Do not need to press the screen.

5.mode adjustment,the mode of operation,count cleared,can be controlled,there is a dedicated Key control,to avoid employee misuse,easy to manage.Once locked,the staff can not be adjusted Section,only available.

6.all the sensitivity of the adjustment on the touch screen,there is no knob,knob Are two hundred years before the technology cannot be stored in the computer,to prevent employees misaligns.

Technical parameters: